Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
If you are the one who is going to do the work, you should be the one to purchase and apply for the permit. If a contractor is hired to do the work, the contractor should be the one to purchase and apply for the permit. Whoever purchases the permit is responsible for the work and its compliance with Town's Building Codes and Ordinances. Therefore, permits should be pulled only by the parties doing the work. Written authorization must be given to allow any other agent to act in behalf of the contractor or homeowner doing the work.
Show All Answers
You will need a building permit for any of the following:
Always keep in mind that other considerations including the following may require some type of permit:
Other Considerations before Requesting a Permit: Check with your HOA to see if you need their permission to make changes to your home.
Ed Rudolphi or Jacob Strange can answer building code and inspection questions about non-residential structures.
Jason Bell can answer your residential building code and inspection questions.
This process typically starts with a public hearing(s) before the Plainfield Plan Commission and/or Board of Zoning Appeals. For this step, contact Eric Berg or Jill Sprague to determine if your property and/or project will require any hearings. They will continue to be your contacts throughout the public hearing process.Construction Plan approval will be required before any actual permits are issued. This can sometimes begin taking place at the same time as or at least during the process of getting public hearing approval. Patty Seymour can help you begin the process of Construction Plan Review.
Once approved by the Plan Commission or Board of Zoning Appeals, you move on to the permitting process. As mentioned, the first portion of this process involves a review of your Construction Plans and may have already taken place. If not, submit your Construction Plans first.
You may submit the paperwork necessary for an Improvement Location Permit (ILP) and/or Building Permit at the same time. Typically this is not done until after approval at any required public hearings. Submit any ILP applications/paperwork to Jill Sprague. Ed Rudolphi will collect the Building Permit application and plans.You should note that the permitting process has a definite order to it. ILP approval will not be granted until the Construction Plans have been approved, however, the process of getting the ILP approved may occur before Construction Plan approval.
The Building Permit is reviewed by the Building Commissioner and the Fire Marshal. These reviews are not typically performed until the ILP is approved. The review can sometimes be partially expedited if you request a foundation permit. Additionally, a building permit will not be issued until an address has been assigned to a property. Contact Jill Sprague for addressing requests/questions.
Inspections will take place during construction with the Fire Marshal and a Building Inspector present. They will inspect a structure for Building and Fire Code Compliance. Contact Ed Rudolphi to set up these inspections.Once the structure and site work are completed, Jill Sprague will conduct an inspection of the property to ensure that all zoning requirements (e.g. landscaping, exterior lighting, parking, etc.) are in compliance. Contact her when the site is ready for this inspection.
Once all inspections show that a project is in compliance you will be issued a Certificate of Zoning Compliance and the project will be complete!
You are required to obtain a permit or permits for the following:
However, there are projects that you may perform without a permit. Examples of work you may perform without a permit are:
When a building is over 200 square feet it requires a building permit and must comply with the building code and zoning ordinances. No permit is required for a portable storage building under 200 square feet or 12 feet by 16 feet, this applies only when they are not placed on or attached to a permanent foundation and the structure does not contain electrical, heating or cooling connections or equipment, but regardless of the structures size and the lack of a permit, the placement of the building still must conform to the zoning setback requirements along with any drainage and utility easement requirements for the location of the proposed structure. (Restrictive Covenants may be applicable, check with your Homeowners Association)
No building permit is required for the construction of a fence. But the placement needs to comply with the Plainfield Zoning ordinance, please contact the Zoning Department at 317-754-5376 for those requirements. Basically a fence should not interfere or negatively affect the intended purpose or use of an easement. (Restrictive Covenants may be applicable, check with your Homeowners Association)
You do not need a permit, if you are simply tearing off the existing or adding a layer of shingles, (The 1 and 2 Family Building Code states, you may add up to three layers of shingles before you have to remove the shingles on any pitch or slope of roofing) If you reconfigure or reconstruct the pitch or slope of the existing roof with new or additional structural materials you will need a permit.
You will need a pool permit; if none inflatable pool is over 18 inches in depth. The following requirements also apply:
The pool or tub area shall be enclosed by either: